Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
7. Install the left rear seat back cushion.
8. Install the rear seat cushion.
Rear Seat Back (Right - AM9)
REMOVAL PROCEDURE
1. Remove the rear seat cushion.
2. Remove the right rear seat back cushion.
3. Fold down the left rear seat back cushion.
4. Unclip and remove the right rear side door sill trim plate.
5. Pull the right rear door opening frame garnish molding from the pinch weld flange just past the top of the quarter upper trim panel.
Trim Panel Replacement: Rear Seat Back (Right - AM9) - Removal Procedure
6. Remove the rear window trim panel.
7. Remove the right rear seat belt lower anchor bolt (1).
Trim Panel Replacement: Rear Seat Back (Right - AM9) - Removal Procedure
8. Remove the plastic retainer that secures the left rear seat back trim panel (2) over the right.
9. Remove the following components from the vehicle:
^
The three plastic retainers
^
The right rear seat back trim panel (3)
INSTALLATION PROCEDURE
