Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Door Lock Cylinder: Service and Repair
REMOVAL PROCEDURE
Lock Cylinder Replacement: Door - Removal Procedure
1. Raise the window.
2. Remove the front door trim panel.
3. Pull the water deflector far enough away to gain access to the door lock cylinder.
4. Remove the lock rod from the door lock cylinder.
5. Remove the following components from the outside door handle:
^
The lock cylinder bolt (3)
^
The left outside door handle bolt (2)
^
The lock cylinder (1)
INSTALLATION PROCEDURE
Lock Cylinder Replacement: Door - Installation Procedure
1. Install the lock cylinder to the outside door handle. Secure the lock cylinder (1) with the two bolts.
Tighten
Tighten the door lock cylinder and left outside door handle bolts to 5.5 N.m (49 lb in).
2. Install the lock rod to the door lock cylinder.
3. Reposition the water deflector into place.
4. Install the front door trim panel.