Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Camshaft: Service and Repair
Exhaust Camshaft and Lifter Replacement
REMOVAL PROCEDURE
1. Remove the timing chain from the engine.
2. Remove the exhaust camshaft sprocket bolt (2).
3. Remove the cam sprocket (1).
4. Remove the exhaust camshaft bearing cap bolts in sequence. Starting at the ends and working toward the center of the camshaft.
5. Remove the front camshaft bearing cap.
6. Remove the exhaust camshaft from the cylinder head.
7. Remove and inspect the lifters for wear, replace as necessary.
INSTALLATION PROCEDURE