Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
^
The four bolts (1)
12. Loosen the A/C receiver pinch clamp.
13. Lift the A/C receiver in order to access the right side engine mount.
14. Remove the right side engine mount.
15. Remove the cylinder head cover.
16. Set the number one piston to the top dead center position.
17. Align the camshaft timing sprockets.
18. Disconnect the power steering oil pressure switch connector.
19. Raise the vehicle. Support the vehicle.
20. Remove the right side lower engine splash shield.
21. Remove the two power steering pump through bolts and the nuts (1).
22. Remove the power steering pump from the mounting surface. Move the pump to the side.
23. Remove the one crankshaft pulley bolt.
24. Remove the crankshaft pulley.
