Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
19. Use the following fasteners in order to secure the insulator:
^
Three bolts (1)
^
Two nuts (3)
-
Tighten the right side engine mount bolts (1, 2, 4) to 54 Nm (40 ft. lbs.).
-
Tighten the right side engine insulator nuts (3) to 54 Nm (140 ft. lbs.).
20. Lower the A/C receiver. Tighten the pinch clamp.
21. Remove the engine support fixture.
22. Install the generator.
23. Remove the plug from the windshield washer reservoir.
24. Connect the windshield washer fluid line.
25. Connect the windshield washer pump connector.
26. Install the windshield washer reservoir. Secure the reservoir using one bolt.
27. Fill the cooling system.
28. Connect the negative battery cable.
