Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Control Assembly: Service and Repair
Control Assembly, HVAC
Removal Procedure
1. Remove the center console trim bezel.
2. Remove the two screws (5) and pull the heater control unit (4) forward.
Top View Of Control Assembly
3. Disconnect the blower speed selector switch electrical connector (2).
4. Remove the following from the heater control unit:
^
the temperature control cable (1)
^
the mode control cable (4)
^
the fresh/recirc control cable (6)
5. Remove the heater control unit.
Installation Procedure
1. Install the heater control unit.
