Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Temperature Gauge: Service and Repair
Fuel/Temperature Gauge Replacement
REMOVAL PROCEDURE
1. Remove the instrument cluster retainer.
IMPORTANT: Do not remove the needle from the fuel or temperature gauge. There are no detent or flat spot on the shafts in order to indicate
the correct placement.
2. Remove the six screws (2) that secure the fuel and temperature gauge to the instrument cluster case.
3. Remove the fuel and temperature gauge (1) from the instrument cluster case.
INSTALLATION PROCEDURE
1. Install the fuel and temperature gauge (1) to the instrument cluster case.