Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
Parking Light Bulb: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Open the hood.
3. Remove the front park/turn signal lamp screw (1).
4. Pull the front park/turn signal lamp (2) forward.
5. Remove the front park/turn signal lamp socket from the lamp lens.
6. Remove the bulb from the socket.
INSTALLATION PROCEDURE
1. Install the bulb to the socket.
2. Install the socket to the front park/turn signal lamp lens (2).
3. Install the front park/turn signal lamp into position. Secure the lamp with the one screw (1).
4. Connect the negative battery cable.
5. Close the hood.