Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
9. Clean the transaxle fluid pan magnets (2) and the bottom of the transaxle fluid pan (1).
10. Clean the gasket material from the fluid pan-to-case mating surfaces.
INSTALLATION PROCEDURE
1. Install the fluid filter screen gasket and the fluid filter screen to the valve body assembly. Secure the screen with 3 bolts.
^
Tighten the fluid filter screen bolts to 10 Nm (89 inch lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
2. Install the new transaxle fluid pan gasket and transaxle fluid pan to transaxle. Secure with 18 bolts.
^
Tighten the transaxle fluid pan bolts to 4.9 Nm (43 inch lbs.).
3. Install the transaxle pan drain plug into the transaxle fluid pan.
^
Tighten the transaxle drain plug to 23 Nm (17 ft. lbs.).
4. Remove the drain pan from under the transaxle.
