Prizm L4-108 1.8L DOHC VIN 8 MFI (1998)
22. Remove the following components from the field frame:
^
The two screws (3)
^
The end cover (2)
^
The O-ring (discard)
23. Remove the brushes.
24. Hold the spring back with a small screwdriver (2) and remove the brush (4) from the brush holder.
25. Disconnect the tour brushes.
26. Remove the brush holder.
27. Remove the armature from the field frame.
28. Inspect the brush springs for corrosion and damage. Replace the components as necessary.
29. Inspect the brush holder and the insulation on the positive plates for wear and damage. Replace the components as necessary.
30. Remove the following from terminal 30 of the solenoid assembly:
30.1. The nut(1)
30.2. The wave washer (2)
30.3. The outside insulator (4)
30.4. The O-ring (5)
30.5. The bolt (11)
30.6. The contact plate (10)