R 10 P/U 2WD L6-292 4.8L (1988)
Removing The Pulley Rotor And Bearing Retainer Ring
2. Pulley bearing retainer (3) using J 6083.
3. Pulley (5).
Installing The Puller Pilot And Pulley Rotor Slot Location
^
Install J 33023-A to the front head.
Installing J-33020 In The Pulley Rotor Slots
^
Install J 33020 tangs into the inner circle of slots in the pulley (5) contact surface. Rotate J 33020 clockwise so the tangs will lock into the
segments between the slots.
