R 30 P/U 2WD V6-262 4.3L (1987)
Figure No. 3 - DIRECT CLUTCH ASSEMBLY
SERVICE ACTION: (Figures No. 2 and No. 3)
When servicing the forward and/or direct clutch, inspect the "dished" clutch plate (#612, Figure No. 2 and #624, Figure No. 3) for scoring, cracks, or
flatness. Also, when servicing the direct clutch assembly, note position of the two 2.32 mm (.0915"), and three 1.97 mm (.7775"), flat steel plates (Figure
No. 3, Item 622). To properly assemble
the direct clutch pack, follow the dished steel plate with: a .0915" steel plate, the second .0915" steel plate, and complete by alternating fiber and .0775"
steel plates.
SERVICE PARTS INFORMATION:
Part Number
Description
8625196
.054" Dished Clutch Plate
8623849
.0775" Flat Clutch Plate
8625197
.0915" Flat Clutch Plate
SERVICE NOTE:
The new forward and direct clutch assemblies cannot be used for past model service as other 1987-88 calibration changes complete by improved
engagement shift feel.
SERVICE MANUAL REFERENCE:
Refer to the Forward and Direct Clutch Assembly sections of the 1987 THM 400 Unit Repair Service Manual.
