S10/T10 Blazer 2WD L4-119 1.9L VIN A 2-BBL (1984)
Figure H - BlazerS-T Truck Models - Child Seat Tether Strap Anchor
Blazer
1.
To expose access hole, remove the rear header garnish molding and turn down the headliner. Locate hole in roof panel. View B. CAUTION: To
prevent damage to the outer roof panel, use a drill stop.
2.
Reposition the headliner and pierce for bolt (3). Align weld nut of anchor plate (1) with hole in headliner and inner sheet metal and install bracket
(2) with bolt (3).
Figure G - Pickup and Extended Cabs S-T Truck Models - Child Seat Tether Strap Anchor