S10/T10 Blazer 2WD L4-137 2.2L DSL (1984)
Figure N - Suburban
C.
Left Seating Position - 1,160 mm (45.75") inboard of the right quarter inner panel. Refer to Figure N.
2.
To insure proper sealing of the hole, remove any dirt or foreign matter from around the hole on the underside of the floor pan where the sealer is to
be applied.
3.
Place sealer on the hole from the underside of the vehicle and assemble the bolt, anchor bracket, anchor plate, and lock nut to the floor pan as
shown in View
A.
Tighten securely and make certain that the hole is completely sealed. Do not make the anchor installation without properly sealing the