S10/T10 Blazer 2WD L4-137 2.2L DSL (1984)
Clutch Pedal Assembly: All Technical Service Bulletins
M/T - Clutch Clunk Noise
Number :
84-134
Section:
7C (VIIb)
Date :
June, 1984
Subject:
CLUTCH "CLUNK"
Model and Year:
1984 "S/T" WITH HYDRAULIC CLUTCH
TO:
ALL CHEVROLET DEALERS
Brake and Clutch Pedal Bracket Assembly
Some 1984 model "S/T" trucks equipped with the hydraulic clutch may experience a "clunk" type noise when the pedal is depressed. This may occur if
the clutch pedal does not hit the rubber bumper stop. To correct this condition, install a new bumper stop, P/N 14040582. The bumper stop is located in
the brake and clutch pedal bracket assembly.
