S10/T10 Blazer 2WD V6-262 4.3L (1988)
Installing The Rotor And Bearing Guide
3. Rotor (5) and bearing (6) assembly with J 25031.
^
Install the J 25031 guide over the shaft (39) end.
^
Install the J 25031 puller over the guide.
^
Engage the arms of J 25031 down into the recessed edge of the rotor hub (5).
^
Hold the arms of J 25031 and tighten the screw against the guide.
Removing The Clutch Rotor Bearing
4. Bearing (6) from the rotor hub (5) with J 9398 and J 8092.
^
Place the rotor hub clutch face up on wooden blocks on a flat surface.
^
Drive the bearing out with J 9398 and J 8092.
Install or Connect
Tools Required:
J 6083 Snap Ring Pliers
J 8092 Universal Handle
J 9481-A Pulley and Bearing Installer