S10/T10 Blazer 2WD V6-262 4.3L VIN Z (1994)
directions from each of the four corners.
2. Oil pan gasket to the oil pan.
3. Oil pan to the engine.
4. Oil pan bolts, nuts, and reinforcements.
5. Tighten pan bolts to 11 N.m (100 in. lbs.).
6. pan nuts at corners to 23 N.m (17 ft. lbs.).
7. Starter motor.
8. Starter motor bolts.
9. Align differential into position.
10. Front propeller shaft.
11. Front differential through bolts.
12. Idler arm.
13. Idler arm bolts.
14. Pitman arm.
15. Pitman arm bolt.
16. Transfer case shield.
17. Flywheel cover.
18. Front skid plate.
19. Front axle shield.
20. Drive belt splash shield.
21. Lower the vehicle.
22. Dipstick.
23. Proper quantity and grade of crankcase oil.
24. Negative battery cable.
