S10/T10 Blazer 2WD V6-262 4.3L VIN Z (1994)
Ignition Timing Connector: Technical Service Bulletins
Ignition Set Timing Connector - Location Correction
File in Section: Engine Fuel & Emission
Bulletin No.: 41-65-41
Date: January, 1995
SERVICE MANUAL UPDATE
Subject:
Section 6A - Ignition Set Timing Connector Location
Models:
1994 Chevrolet and GMC Truck S/T Models
1994 Oldsmobile Bravada
with 4.3L Engine (VINs W, Z - RPOs L35, LB4)
The location of the Set Timing Connector is incorrectly called out in "Section 6A" (Page 6A-8) of the "Driveability, Emissions and Electrical
Diagnosis", Service Manual and in the 1994 Oldsmobile Bravada Service Manual Supplement (Page 6E3-C4-8).
The correct location of the Set Timing Connector is inside the cab where the Heater Box and the carpet meet on the passenger side floor.
Pull carpet back to expose the single wire and connectors on the outside of the control module harness. The wire colors are tan with a black stripe.
