S10/T10 Blazer 2WD V6-262 4.3L VIN Z (1994)
1. Adapter & bearing assembly (85).
^
Lubricate inner surface of bearing (85) with lithium grease.
2. Bearing adapter retainer (86).
3. Lower bearing adapter clip (87).
4. Steering column to vehicle.
5. Negative (-) battery cable.
Mid Column - Column Shift
MID COLUMN
INCLUDES:
STEERING COLUMN HOUSING ASSEMBLY
STEERING WHEEL LOCK SHOE
SWITCH ACTUATOR RACK
BEARING ASSEMBLY
STEERING COLUMN HOUSING SUPPORT ASSEMBLY
STEERING SHAFT ASSEMBLY
SHIFT TUBE ASSEMBLY
TOOLS REQUIRED:
^
J 23653-C Lock Plate Compressor
^
J 21854-01 Pivot Pin Remover
^
J 22635 Lock Shoe and Release Lever Pin Remover and Installer
^
J 8092 Driver Handle
^
J 38639 Steering Column Housing Bearing Installer
^
J 23072 Shift Tube Remover
^
J 23073-01 Shift Tube Installer
IMPORTANT
^
Before doing any service procedures in this section, removal of Steering Wheel is needed.
REMOVE OR DISCONNECT
