S10/T10 Blazer 2WD V6-262 4.3L VIN Z (1994)
Installing Shift Tube
6. Shift tube (85) using J23073-01.
Installing Shift Tube Retaining Ring, Thrust Washer
7. Thrust washer (67).
8. Retaining ring (66).
9. Gate (65) and screws (64) to support (63).
TIGHTEN
^
Tighten screws (64) to 3.7 Nm (33 lb.in.).
10. Dimmer switch rod (77) to column housing support assembly (62).
11. Support assembly (62) and screw (61).
TIGHTEN
^
Tighten screw (61) to 8.8 Nm (77 lb.in.).
12. Column shaft assembly (55) to jacket assembly (73).
^
Lubricate with lithium grease.
13. Tilt lever.
