chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Lamps and Indicators - A/T > < Fluid Pump, A/T|Specifications

S10/T10 Blazer 2WD V6-262 4.3L VIN Z (1994)

Page 1
background image

Governor: Service and Repair

1. Raise and support vehicle
2. Remove governor cover from case using extreme care not to damage cover. If cover is damaged, it should be replaced.
3. Remove governor.
4. Reverse procedure to install and check fluid level.

Lamps and Indicators - A/T > < Fluid Pump, A/T|Specifications