chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

A/T - No Reverse, Perceived Second Gear Lack of Power|Page 4540 > < A/T - No Reverse, Perceived Second Gear Lack of Power|Page 4538
Page 4
background image

-

When moving the transmission shift lever in either direction, all detent positions will be attainable without a binding condition present.

-

With the key on and the shift lever in "Reverse", the key will not be removable and the steering column will not be locked.

-

With the key in the lock position and the shift lever in the "Park" position, the key will be removable, the steering wheel will be locked, and the
shift lever will not disengage from "Park". In addition, verify that the vehicle is held stationary in "Park".

-

The engine must start in the "Neutral" or "Park" positions only. Adjust neutral safety switch as required.

-

Verify that shift indicator position matches actual transmission range. Adjust "PRNDL" switch as required.

Please note these new procedures in the appropriate Service Manual, Section 7A.

WARRANTY INFORMATION:

For vehicles repaired under warranty, use:

Labor 0p

Description

Labor Time

K5244

Linkage, Shift

Use Published

Adjust

Labor Operation

Time

A/T - No Reverse, Perceived Second Gear Lack of Power|Page 4540 > < A/T - No Reverse, Perceived Second Gear Lack of Power|Page 4538