S10/T10 Blazer 2WD V6-262 4.3L VIN Z (1994)
-
Use J 8614-01 to hold the pinion flange.
5. Propeller shaft to the pinion flange.
6. Bolts and retainers.
-
Tighten bolts to 45 Nm (33 ft. lbs.).
Chevrolet Workshop Service and Repair Manuals
Drive Axles, Bearings and Joints >
< Seals and Gaskets, Differential|Service and Repair|Page 4804
Page 3
