S10/T10 Blazer 2WD V6-262 4.3L VIN Z (1994)
Wiper Gear Box: Service and Repair
1. Disconnect battery ground cable.
2. Remove windshield wiper arms.
3. Remove cowl vent and grille.
4. Remove motor assembly to wiper linkage retaining nuts, then drive link socket from crank arm ball of wiper motor assembly.
5. Remove screws securing wiper linkage to cowl panel and lift out linkage.
6. Reverse procedure to install. Torque all attaching fasteners to 49-80.0 inch lbs.
