S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
Speaker: Service and Repair
Speaker Replacement - Rear
SPEAKER REPLACEMENT - REAR (UTILITY)
TOOLS REQUIRED
J 34940 Rivet Gun
REMOVAL PROCEDURE
1. Remove the rear body side trim panel.
2. Remove the radio rear speaker retaining rivets.
3. Disconnect the electrical connector.
4. Remove the radio rear speaker from the rear body side trim panel.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Install the radio rear speaker to the body side inner panel.
3. Install the speaker retaining rivets using J 34940.
4. Install the rear body side trim panel.
-
Body Side (Crew Cab) in Interior Trim.
5. Inspect for proper circuit operation.