S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
Trunk / Liftgate Latch: Service and Repair
Latch Support Replacement - Lift Gate Window
Latch Support Replacement - Lift Gate Window
Removal Procedure
1. Remove the liftgate window latch.
2. Disconnect the electrical connectors as needed.
3. Mark the location of the liftgate window latch support in order to ensure proper alignment during installation.
4. Remove the bolts that retain the liftgate window latch support to the liftgate.
5. Remove the liftgate window latch support from the liftgate.
Installation Procedure
1. Align the marks made during disassembly in order to install the liftgate window latch support.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts that retain the liftgate window latch support to the liftgate.
Tighten the bolts to 9 N.m (80 lb in).
3. Connect the electrical connectors as needed.
4. Install the liftgate window latch.