S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
1. Install the console to the vehicle.
2. Install the screws that retain the front of the console.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 7 N.m (63 lb in).
3. Install the cup holder insert.
4. Install the nuts that retain the rear of the console.
Tighten
Tighten the nuts to 10 N.m (89 lb in).
5. Install the transmission select switch (if equipped).
