S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
Trunk / Liftgate Lock Cylinder: Service and Repair
Lock Cylinder Replacement - Lift Gate
Removal Procedure
1. Remove the liftgate window latch support.
2. Disconnect the electrical connectors, as needed.
3. Remove the clip that retains the liftgate lock cylinder to the liftgate.
4. Remove the liftgate lock cylinder from the liftgate.
Installation Procedure
1. Install the liftgate lock cylinder to the liftgate.
2. Install the clip that retains the liftgate lock cylinder to the liftgate.
3. Connect the electrical connectors, as needed.
4. Install the liftgate window latch support.