S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
Sunroof / Moonroof Frame: Service and Repair
SUNROOF FRAME REPLACEMENT WITH RPO CODE ZRX/EXTREME W/ CF5
REMOVAL PROCEDURE
1. Remove the sunroof panel window garnish molding.
2. Remove the screws (1) around the entire periphery of the lower frame (2).
3. Disconnect the electrical connector to the motor.
4. Remove the silver motor screw.
5. Carefully lower the rear of the frame and work the frame (2) from the front of the headliner.
6. Remove the lower frame (2) from the vehicle.
7. Remove the upper frame assembly from the vehicle.
IMPORTANT: The upper frame assembly will need to have new foam tape applied to the outer ring prior to assembly. The new foam tape will
ensure the sunroof will seal properly upon the lower frame installation.