S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
2. Remove the recliner handle (1) from the seat bottom.
INSTALLATION PROCEDURE
1. Install the recliner handle (1) to the seat bottom.
2. Install the retaining screw to secure the handle.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the handle retaining screw to 1.5 N.m (14 lb in).
Seat Back Recliner Replacement - Front
SEAT BACK RECLINER REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the recliner handle.
2. Remove the recliner cover.
3. Remove the inertia latch from the recliner assembly.
4. Remove the recliner assembly bolts.
