S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
4. Install the 1 screw in order to secure the step panel inboard tab to the pickup box rear inner pillar.
Tighten
Tighten the inboard tab screw to 1.5 N.m (13.3 lb in).
5. Install the forward brace to the forward support bracket using the 1 screw.
Tighten
Tighten the forward brace to forward support bracket screw to 9.0 N.m (6.6 lb ft).
6. Install the forward brace to the step panel using the 1 screw.
Tighten
Tighten the screw to 9.0 N.m (80 lb in).