S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
Brake Shoe: Service and Repair
Brake Shoe Replacement
Removal Procedure
1. Release the park brake, if applied.
2. Raise the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel.
4. Remove the brake drum.
5. Using denatured alcohol, clean the rear brake shoes and the hardware.
6. Using non-lubricated, filtered compressed air, dry the rear brakes and hardware.
7. Remove the brake adjusting hardware.
8. Remove the park brake hardware.