S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
Wheel Cylinder: Service and Repair
Wheel Cylinder Replacement
Removal Procedure
1. Remove the brake shoes.
2. Disconnect the brake pipe.
3. Remove two bolts.
4. Remove the wheel cylinder.
Installation Procedure
1. Install the wheel cylinder.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts.
Tighten the bolts to 13 Nm (115 inch lbs.).
3. Connect the brake pipe to the wheel cylinder.
Tighten the brake pipe fitting to 21 Nm (16 ft. lbs.).
4. Install the brake shoes.
5. Bleed the brake system.
