S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
Cruise Control Servo Cable: Service and Repair
CRUISE CONTROL CABLE REPLACEMENT
REMOVAL PROCEDURE
IMPORTANT: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts
the cable. Refer to Cruise Control Description and Operation for the complete operational details.
1. Open the hood.
NOTE: Do not remove the C-clip from the cruise control connector. The C-clip was not designed for removal. Damage may occur when removing.
2. Do not remove the adjuster screw from the end of the cruise control cable. No adjustment will be needed.
3. Remove the cruise control cable from the throttle linkage.
Use a suitable tool to lightly pry off the end of the cruise control cable from the stud on the throttle lever.
