S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
Notice: Completely engage the J 38606 jaws on the valve spring. The J 38606 may slip off and scratch the valve spring. Replace the valve spring
if the valve spring becomes scratch.
10. Use J 38606 when J 5892-D will not fit.
11. Remove the valve keys (1)
12. Carefully release the valve spring tension
13. Remove the J 5892-D or the J 38606.
14. Remove the valve spring cap (2) and valve spring (3).
15. Remove the valve stem oil seal (4).
Installation Procedure