S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
27. Connect the following electrical connectors:
^
The Idle Air Control (IAC) motor (3)
^
The Throttle Position (TP) sensor (2)
^
The A/C compressor cutoff switch, if equipped (5)
^
The A/C clutch switch, if equipped (1)
^
The Engine Coolant Temperature (ECT) sensor (4)
28. Connect the following electrical connectors:
^
The fuel meter body assembly (1)
^
The EVAP canister purge solenoid valve (2)
^
The Manifold Air Pressure (MAP) sensor (3)
29. Connect the following electrical connectors:
^
The ignition coil (2)