chevrolet Workshop Repair Guides

Chevrolet S10/T10 Blazer 2WD V6 Workshop Repair Manuals

Disabling and Enabling|Page 9197 > < Disabling and Enabling
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Disabling

Zone 1

IMPORTANT:  Refer to SIR Service Precautions before disabling the SIR system.

1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn OFF the ignition.
3. Remove the key from the ignition.

4. Remove the SIR fuse from the I/P fuse block (1) located in the I/P fuse block.

IMPORTANT:  With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.

5. Raise and support the vehicle.

6. Remove the connector position assurance (CPA) from both inflatable restraints front end discriminating sensor connectors located on the frame

crossmember.

7. Disconnect the inflatable restraints front end discriminating sensor connectors.

Zone 3

1. Turn the steering wheel until the vehicle's wheels are pointing straight ahead.

IMPORTANT:  Refer to SIR Service Precautions before disabling the SIR system.

2. Turn OFF the ignition.

Disabling and Enabling|Page 9197 > < Disabling and Enabling