S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
Installation Procedure
1. Coat the new filter seal with automatic transmission fluid.
2. Install the new filter seal into the transmission case. Tap the seal into place using a suitable size socket.
3. Install the new filter into the case.
4. Install the oil pan and a new gasket.
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Install the oil pan bolts.
^
Tighten the oil pan to transmission case bolts alternately and evenly to 11 Nm (97 inch lbs.).
