S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
5. Install the compressor hose assembly to the accumulator.
Tighten
Tighten the hose to...........................48 N.m (35 lb ft).
6. Install the sealing washers.
7. Install the compressor hose assembly to the compressor.
8. Install the compressor hose assembly washer (2) and the bolt (1).
Tighten
Tighten the bolt to..............................33 N.m (24 lb ft).
9. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
10. Leak test the fittings of the components using the J 39400-A.
