S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
Evaporative Emissions Hose: Service and Repair
EVAP Hoses/Pipes Replacement - Canister/Fuel Tank
REMOVAL PROCEDURE
1. Remove the fuel tank.
2. Disconnect the evaporative emission (EVAP) vapor pipe from the fuel sender assembly.
3. Cap the fuel sender and EVAP vapor pipe in order to prevent contamination.
INSTALLATION PROCEDURE
1. Remove the caps from the fuel sender assembly and EVAP vapor pipe.
2. Connect the EVAP vapor pipe to the fuel sender assembly.
3. Install the fuel tank.