S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
Tighten
Tighten the fuel fill tube bracket retaining bolt to 15 N.m (11 lb ft).
4. Install the ground wire (5) to the frame crossover.
Tighten
Tighten the ground strap retaining screw to 15 N.m (11 lb ft).
5. Attach the ground wire to the lower fuel fill tube with new retaining straps (6).
6. Position the hose clamps (2, 7) on the upper (11) and lower (13) fuel fill hoses.
Tighten
Tighten the hose clamps (2, 7) to 2.5 N.m (22 lb in).
7. Install the spare tire (underbody mounted spare tire only).
8. Lower the vehicle.
9. Remove the fuel fill cap and refill the fuel tank.
10. Install the fuel fill cap.
11. Connect the negative battery cable.
