S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
Wiper Switch: Service and Repair
WIPER/WASHER SWITCH REPLACEMENT - REAR
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Use a flat-bladed tool in order to pry the switch away from the instrument panel.
3. Disconnect the electrical connectors as necessary.
INSTALLATION PROCEDURE
1. Connect the electrical connectors as necessary.
2. Install the switch to the instrument panel.
3. Connect the negative battery cable.