S10/T10 Blazer 2WD V6-4.3L VIN X (2003)
Stabilizer Link: Service and Repair
Rear Stabilizer Shaft Link Replacement
(Pickup and 4-Door Utility)
Stabilizer Shaft Link Replacement
(Pickup and 4-Door Utility)
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the stabilizer shaft link upper nut and bolt.
3. Remove the stabilizer shaft link lower nut and bolt.
4. Remove the stabilizer shaft link
Installation Procedure
