S10/T10 Blazer 4WD L4-137 2.2L DSL (1984)
specified at end of section.
4. Connect axle vent hose to carrier.
5. Install steering idler arm in correct position marked at time of removal.
6. Install steering stabilizer to frame.
7. Install tube and shaft assembly.
8. Check axle lube, fill to level of fill plug hole with lubricant specified.
9. Lower vehicle, test drive and recheck lubricant
Output Shaft Pilot Bearing
Fig. 1 Exploded View Of Front Drive Axle. Except Bravada, Sonoma GT, Syclone & Typhoon