chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Paint - Codes & Cross References|Page 7703 > < Paint - Codes & Cross References|Page 7701
Page 19
background image

Zep Corporation 
Atlanta, GA. Telephone # 404-352-1680

Stain Away # HBY 0160 
Hornby Chemical 
Milwaukee, WI. Telephone # 414-462-2833

If the rail dust remover is not available in your area, call one of the numbers listed above for a distributor near your location.

PAINT GAGES - USE BELOW OR EQUIVALENT

Elcometer Inc. 
1893 Rochester Ind. Drive 
Rochester Hills, MI. 48309 
(800) 521-0635 or 
(313) 650-0500

Zelcro, Ltd./Zormco 
8520 Garfield Rd. 
Cleveland, OH 44125 
(216) 441-6102

Delfesko Corp. 
410 Cedar St. 
Ogdensburg, NY 13669 
(800) 267-0607 or 
(613) 925-5987

Pro Motorcar Products Inc. 
22025 US-19 North 
Clearwater, FL 34625 
(800) 323-1090 
(813) 726-9225

"We believe these sources and their equipment to be reliable. There may be additional manufacturers of such equipment. General Motors does not
endorse, indicate any preference for or assume any responsibility for the products or equipment from these firms or for any such items which may be
available from other sources."

Technical Service Bulletin # 231054R

Date: 930701

Paint - Identification/Repair of Colorcoat Delamination

BULLETIN NUMBER: 92-1O-134A

SECTION: 10 Body

NUMBER: 4

CORPORATE REFERENCE NUMBER: 231054R

DATE: July 1993

SUBJECT:
SERVICE PROCEDURES FOR IDENTIFICATION AND REPAIR OF PAINT COLORCOAT DELAMINATION FROM ELPO PRIMER

MODELS:
1988-92 TRUCKS

THIS BULLETIN CANCELS AND REPLACES TRUCK SERVICE BULLETIN 92-10-134 (CORP # 231054R), DATED OCTOBER 1992. IT IS
BEING REVISED TO REMOVE THE COVER LETTER PORTION AND SUBJECT STATEMENT NOW INCLUDES NOTE FOR TRUCKS AND
REVISES THE MONOCOAT MATERIAL ALLOWANCES ON "G", "S/T" AND SOME "R/V" MODELS. THE ALLOWANCE FOR "ADD FOR
TWO-TONE" ON G AND S/T TRUCKS HAS BEEN CHANGED. ALL COPIES OF 92-10-134 SHOULD BE DISCARDED.

The revisions are the result of changes to the MONOCOAT (ENAMEL) material allowance charts published in June, 1993.

Six (6) of the "G" model revisions use Basecoat/Clearcoat material allowance codes. THESE ARE TO BE USED AS DOLLAR REFERENCES ONLY,

Paint - Codes & Cross References|Page 7703 > < Paint - Codes & Cross References|Page 7701