S10/T10 Blazer 4WD V6-262 4.3L (1989)
3.
Install the clamp (2) on the insulators at the overlapped portion and tighten the clamp.
Inspection:
1.
Start the engine and check all hose connections for leaks.
2.
Place the climate control lever in the "Max A/C" position and ensure that the water valve is operating properly.
PARTS INFORMATION:
Part Number
Description
Quantity
14044414
Valve, heater water
1
15612120
Insulator, accumulator lower
1
15612121
Insulator, accumulator upper
1
15530486
Clamp, insulator
1
549589
Clamp, water hose
8
6272766
Tee, vacuum hose
1
*
Hose, 3/4 inch heater water
as req'd
*
Hose, 5/8 inch heater water
as req'd
*
Hose, vacuum, plastic
as req'd
*
Hose, vacuum, 3/32 inch rubber
as req'd
* Part may be obtained locally at most hardware stores.
Parts are currently available through GMSPO.
WARRANTY INFORMATION
For vehicles repaired under warranty use:
Labor Operation Number:
T7001
Labor Time:
.7 hr.
NOTE: Labor Operation is coded to base vehicle coverage in the warranty system.