S10/T10 Blazer 4WD V6-262 4.3L (1989)
Blower Motor Case
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Electrical connections at the blower motor (91) and at the resistor (95).
3. Blower case retaining screws (96) and nuts (97).
4. Blower case (55).
5. Blower motor (54) from the case (55).
INSTALL OR CONNECT
1. Blower motor (54) to the case (55).
2. Blower case (55).
3. Blower case retaining screws (96) and nuts (97).
^
Tighten screws (96) and nuts (97) to 3 Nm (27 in. lbs.).
4. Electrical connections to the blower motor (54) and the resistor (95).
5. Negative battery cable.