S10/T10 Blazer 4WD V6-262 4.3L (1989)
Installing The Coil Housing
2. Clutch coil (8) to the front head (16).
^
Align the coil and housing assembly on the compressor front head (16) 50 that the electrical terminals line up the marks scribed on the
compressor
^
Align the coil locator projections on the coil housing with the holes in the front head (16).
3. Coil and housing retainer ring (7) with J 6435.
Clean
^
Remove any excess adhesive.
4. Pulley and bearing assembly (5 and 6).
5. Clutch plate and hub assembly (2).