S10/T10 Blazer 4WD V6-262 4.3L (1989)
J 29886 Threaded Driver Handle
J 33020 Pulley Puller
J 33023-A Puller Pilot
1. Clutch plate and hub assembly (22).
Removing The Pulley Rotor & Bearing Assembly Retaining Ring
2. Pulley bearing retainer (24) using J 6083.
3. Pulley (26).
Installing The Pulley Rotor & Bearing Puller Guide
^
Install J 33023-A to the front head.
Removing The Pulley Rotor & Bearing Assembly
^
Install J 33020 tangs into the inner circle of slots in the pulley (26) contact surface. Rotate J 33020 clockwise so the tangs will lock into the
segments between the slots.
^
Hold J 33020 in place and tighten the puller screw against J 33023-A puller pilot to remove the pulley (26).