S10/T10 Blazer 4WD V6-262 4.3L (1989)
Compressor Clutch: Service and Repair
With SD-709 Compressor
Compressor Components
Remove or Disconnect
Tool Required:
J 37791 Clutch Front Plate Spanner Wrench
J 36045 Front Plate Puller
J 37792 Puller Fingers
J 8433 Puller Set
J 37795 Bearing Remover and Installer/Pulley Installer
J 29886 Driver Handle
^
Insert the two pins of the J 37791 into any two threaded holes of the clutch front plate (2). Hold the clutch plate stationary.
1. Hex nut using a 19 mm socket.